How to Install the Great Yoga Wall®
The YOGA WALL® is designed around our patented ball-and-socket hardware system. You mount the spring-loaded socket wall plates into ¾″ hardwood veneer plywood. The wall belts and bars snap into the wall plates with a brass ball — giving you tremendous flexibility of use.
The Basic Setup uses 3 rows of wall plates. The Deluxe Setup uses 5 rows. Plates are mounted to the plywood in columns 16″ apart. The plywood is then attached to the wall by bolting 2″×4″s horizontally into existing wall studs, then screwing the plywood into the 2×4s.
We have a router template available to prepare the plywood for the wall plates — details below.
Installation GuideChoose Your Setup
Basic Setup
3 rows of wall plates — ideal for home practitioners or smaller spaces. Covers the core range of yoga wall exercises and belt positions.
Deluxe Setup
5 rows of wall plates — the preferred choice for studios and serious practitioners. Offers the full range of inversions, traction work, and therapeutic applications.
🔧 Tools You'll Need
You supply the tools; we supply the hardware system. Purchase your ¾″ hardwood veneer plywood at your local lumber yard.
Wall Plate Spacing Planner
Plate columns are spaced 16″ apart horizontally (required for Wall Bar use). Use this table for the exact row heights from the floor when planning your layout.
| Row | Basic Setup (3-row) | Deluxe Setup (5-row) | Typical Use |
|---|---|---|---|
| Row 1 (lowest) | 2¼″ from floor | 2¼″ from floor | Leg & hip work, grounding poses |
| Row 2 | 3′-3″ from floor | 1′-8″ from floor | Standing poses, mid-body support |
| Row 3 | 6′-6″ from floor | 3′-3″ from floor | Upper body, shoulder work |
| Row 4 | — | 4′-10″ from floor | Chest openers, backbends |
| Row 5 (highest) | — | 6′-6″ from floor | Inversions, full traction |
Tip: Mark each row position on the plywood before routing to verify spacing with a tape measure.
Step-by-Step Installation
Purchase Your Plywood
Buy ¾″ hardwood veneer plywood at your local lumber yard. The number of sheets you need depends on your setup size — a Basic (3-row) setup requires less than a Deluxe (5-row) setup. Cut the plywood to your wall dimensions before routing.
Prepare the Plywood Using the Router Template
Use the router template with your router and ¾″ double-flute straight cutting bit to cut out holes for the wall plates. The template ensures all holes are spaced exactly 16″ apart — the precise spacing required for the Wall Bar to fit correctly.
Once routing is done, use the 1&⅜″ butterfly bit or hole cutter for any secondary holes. See the Router Template section below if you need to rent the template.
Prepare the Wall — Install the 2×4 Horizontal Backing
Locate your existing wall studs. Bolt 2″×4″ horizontal boards into those studs at the heights corresponding to your row layout. These 2×4s provide the secure backing that the plywood will attach to. Use a level throughout this step to ensure everything is plumb.
Mount the Plywood to the 2×4s
Screw the prepped plywood panels onto the 2×4 backing boards. Pre-drill holes to prevent splitting. Ensure the plywood is flush and level before fully tightening all fasteners.
Install the Wall Plates
Insert the spring-loaded socket wall plates into the routed holes in the plywood. Secure each plate using the allen wrench and socket wrench as specified in the hardware instructions. Use the C-clamps to hold plates in position as needed during fastening.
Snap In Your Belts & Accessories
Once all wall plates are installed and secure, snap your wall belts, wall bars, and other accessories into the ball-and-socket fittings. Test each connection to confirm a firm snap-in. Your Yoga Wall is ready to use!
Installation Router Template — Rental Program
The router template is used to exactly cut out the holes in ¾″ plywood for the wall plates. It spaces the wall plates precisely 16″ apart across the plywood — the exact spacing required for wall bar use.
Templates are available to rent for customers who have purchased Yoga Wall plates. The full $300 deposit is refunded when the template is returned in good condition.
View Router Template in Hardware →Ready to Get Started?
Browse our full hardware lineup — wall plates, packages, installation kits, and the router template rental — to get everything you need for your DIY installation.
Contact for Installation Information
Why Choose Professional Installation?
Precision Spacing
Every wall plate is positioned to the exact 16″ specification — critical for Wall Bar compatibility and optimal performance.
Fast Turnaround
An experienced installer can complete most residential setups in a single day, minimizing disruption to your home or studio.
Structural Know-How
Proper stud location, blocking, and load distribution — especially important for studio-grade or multi-panel installations.
Tested & Ready
Installation is tested before the crew leaves. Every wall plate, belt connection, and bar fitting is verified safe to use.
Studio-Scale Capable
Multiple walls, large rooms, commercial builds — our affiliate can handle complex, large-scale installations that DIY can't easily tackle.
Peace of Mind
Know your investment is installed correctly from day one. No learning curve, no do-overs, no risk to your plywood or walls.